LBE Series, Linear Geared Motor with Control System

Discuss Linear or Rotary Actuators, GUI's and related Accessories here.
Post Reply
Mr.Thota
Posts: 27
Joined: Tue Oct 02, 2018 9:45 pm
Location: New Jersey

LBE Series, Linear Geared Motor with Control System

Post by Mr.Thota » Thu Nov 28, 2019 6:56 am

Hi !!

We are planning to use Model: LBE2F90MC-8-1 LBE Series, Linear Geared Motor with Controller for vertical pushing & pulling application along with the following accessories. Please let us know your confirmation to proceed further in this matter.

CC02BLEM
Connection Cable with Electromagnetic Brake (Non Flexible)
Cable Length: 2 Mtrs.

LXDT-4
Limit Switch Dog

PADP03
DIN Rail Mounting Plate

PAVR-20KZ
External Speed Potentiometer

If any additional accessories to be required ??

om_tech_support_KR
Posts: 67
Joined: Thu Jan 11, 2018 3:03 pm

Re: LBE Series, Linear Geared Motor with Control System

Post by om_tech_support_KR » Mon Dec 02, 2019 11:33 am

Hi Mr.Thota,

The LBE2F90MC-8-1 package does include a 1 meter connection cable and the external potentiometer PAVR-20KZ. The LXDT-4 part number is only the 4 pieces of limit switch dogs. If you were looking for the sensors also then the part number would be PARP-MS which includes 2 limit switches, 4 dog pieces, 1 limit switch mounting bracket and a cover. For vertical applications we recommend using the regenerative resistor EPRC-400P.

Mr.Thota
Posts: 27
Joined: Tue Oct 02, 2018 9:45 pm
Location: New Jersey

Re: LBE Series, Linear Geared Motor with Control System

Post by Mr.Thota » Tue Dec 03, 2019 6:28 am

Hi !!

Thankyou verymuch for your reply.
Requested to please send us wiring details for this LBE Seris, since this is a new model combination it seems.
Also please specify how to connect external sensors (PARP-MS) and input to controller and it's wiring details to proceed further.
Please assist us with the guidelines to go ahead in this regard.

Thanks for advance !!

om_tech_support_KR
Posts: 67
Joined: Thu Jan 11, 2018 3:03 pm

Re: LBE Series, Linear Geared Motor with Control System

Post by om_tech_support_KR » Tue Dec 03, 2019 2:52 pm

Hi Mr.Thota,

The LBE series uses the same driver as the BLE series I will link the manual below and you can reference page 33 for a sample wiring diagram.

https://www.orientalmotor.com/products/ ... 109-7E.pdf

For the external sensors PARP-MS I will link the manual below reference page 7 for the sample wiring diagram. You will have to connect your controller to read the sensors since the sensors won't connect to the driver.

https://www.orientalmotor.com/products/ ... -4JECK.pdf

Post Reply