BLV 200 & 400 Watts for AGV Application

Discuss Brushless DC Motor Speed Control Systems or AC Motor Speed Control systems and related Accessories here.
Post Reply
Mr.Thota
Posts: 48
Joined: Tue Oct 02, 2018 9:45 pm
Location: New Jersey

BLV 200 & 400 Watts for AGV Application

Post by Mr.Thota » Tue Apr 02, 2019 1:47 am

Hi,
Good Day !!

We are planning to use BLV Series 200 Watts & 400 Watts for AGV application, so we would like to know the below clarifications to proceed further in this regard.

• We required circuit diagram / connections of parallel operation to connect 2 motors to operate & synchronize at the same / different speed using DC power supply or external potentiometer. Ex: Like BLH Series.
• Is it possible to synchronous operation (or) parallel operation for 3 motors ?? Ex: 2 motor are driven parallel operation and 1 motor is steering operation.

As we have already gone through the operating/user manual in detail, but we couldn’t find the details pertaining to the parallel operation for BLV series motors.

Henceforth you are requested us to send us the details (Circuit Diagram / Connections) pertaining to above mentioned query.

Looking forward to hear from you at the earliest.

om_tech_support_KR
Posts: 123
Joined: Thu Jan 11, 2018 3:03 pm

Re: BLV 200 & 400 Watts for AGV Application

Post by om_tech_support_KR » Tue Apr 02, 2019 7:19 am

Hi Mr. Thota,

Yes the BLV series can be used in a multi-motor control operation with either control with external pots or external DC voltage like the BLH series. Reference the link below for wiring examples.

https://www.orientalmotor.com/products/ ... df#page=35

Mr.Thota
Posts: 48
Joined: Tue Oct 02, 2018 9:45 pm
Location: New Jersey

Re: BLV 200 & 400 Watts for AGV Application

Post by Mr.Thota » Mon Aug 10, 2020 6:58 am

Hi,
Good Day !!

Finally, we have installed the AGV System with BLV Series (BLV620K30S-2), we are using 04 motors for one AGV system.
Also enclosed herewith the connection diagram and AGV diagram for your reference.

Now, everything is working fine and operating.
But, the 3rd rear of the wheel motor is tripping (2 Alarm Blinks) while taking left turning and, the radius of turning is around 1.6 Mtr.
We have already tried and checked with no load & by changing acceleration and deceleration settings etc.., but the issue is not identified & resolved exactly.

Out of four motors, all are working fine, but the 3rd wheel of motor is getting a problem with this 2 alarm blinks only.

Hence requested to please look into this and let's know your valued suggestion to proceed further.

Please suggest an immediate solution...
Attachments
connection-diagram.jpg
connection-diagram.jpg (38.92 KiB) Viewed 1784 times
agv-diagram.jpg
agv-diagram.jpg (34.7 KiB) Viewed 1784 times

Mr.Thota
Posts: 48
Joined: Tue Oct 02, 2018 9:45 pm
Location: New Jersey

Re: BLV 200 & 400 Watts for AGV Application

Post by Mr.Thota » Mon Aug 10, 2020 9:34 am

Hi !!
Request to please reply, as we need your support immediately.
please do the needful..

om_tech_support_KR
Posts: 123
Joined: Thu Jan 11, 2018 3:03 pm

Re: BLV 200 & 400 Watts for AGV Application

Post by om_tech_support_KR » Mon Aug 10, 2020 12:29 pm

Hello,

The 2 blink alarm is an overload alarm meaning a load exceeding the rated torque was applied to the motor for 5 seconds or more. You would have to decrease the load or try having the accel/decel rate at a higher value. In your case since it happens while doing a left turn you might have to try using a different turn radius.

Post Reply