BLV 200 & 400 Watts for AGV Application

Discuss Brushless DC Motor Speed Control Systems or AC Motor Speed Control systems and related Accessories here.
Post Reply
Posts: 28
Joined: Tue Oct 02, 2018 9:45 pm
Location: New Jersey

BLV 200 & 400 Watts for AGV Application

Post by Mr.Thota » Tue Apr 02, 2019 1:47 am

Good Day !!

We are planning to use BLV Series 200 Watts & 400 Watts for AGV application, so we would like to know the below clarifications to proceed further in this regard.

• We required circuit diagram / connections of parallel operation to connect 2 motors to operate & synchronize at the same / different speed using DC power supply or external potentiometer. Ex: Like BLH Series.
• Is it possible to synchronous operation (or) parallel operation for 3 motors ?? Ex: 2 motor are driven parallel operation and 1 motor is steering operation.

As we have already gone through the operating/user manual in detail, but we couldn’t find the details pertaining to the parallel operation for BLV series motors.

Henceforth you are requested us to send us the details (Circuit Diagram / Connections) pertaining to above mentioned query.

Looking forward to hear from you at the earliest.

Posts: 69
Joined: Thu Jan 11, 2018 3:03 pm

Re: BLV 200 & 400 Watts for AGV Application

Post by om_tech_support_KR » Tue Apr 02, 2019 7:19 am

Hi Mr. Thota,

Yes the BLV series can be used in a multi-motor control operation with either control with external pots or external DC voltage like the BLH series. Reference the link below for wiring examples. ... df#page=35

Post Reply