Fuji RS-485 vs Flex RS-485 wiring
Posted: Tue May 22, 2018 2:19 pm
Q: I am trying to use the suggested RS485 converter on the Fuji that I had used with your previous products but I cannot make a connection.
A: The wiring on the Fuji products does differ from our standard products. This would be the wiring for our standard products.
For the Fuji product you would use the same pin 2 for GND but the T+ (DX+) would be pin 5 white/blue and T- (DX-) would be pin 4 blue on both RJ-45 cable types.
http://www.orientalmotor.com/products/p ... df#page=19
A: The wiring on the Fuji products does differ from our standard products. This would be the wiring for our standard products.
- rj.png (33.22 KiB) Viewed 4760 times
- rs485.png (15.39 KiB) Viewed 4760 times
http://www.orientalmotor.com/products/p ... df#page=19
- rs fuji.png (15.84 KiB) Viewed 4760 times