Fuji RS-485 vs Flex RS-485 wiring

Discuss anything that may not be product related here.
Post Reply
Posts: 129
Joined: Thu Jan 11, 2018 3:03 pm

Fuji RS-485 vs Flex RS-485 wiring

Post by om_tech_support_KR » Tue May 22, 2018 2:19 pm

Q: I am trying to use the suggested RS485 converter on the Fuji that I had used with your previous products but I cannot make a connection.

A: The wiring on the Fuji products does differ from our standard products. This would be the wiring for our standard products.
rj.png (33.22 KiB) Viewed 5407 times
rs485.png (15.39 KiB) Viewed 5407 times
For the Fuji product you would use the same pin 2 for GND but the T+ (DX+) would be pin 5 white/blue and T- (DX-) would be pin 4 blue on both RJ-45 cable types.
http://www.orientalmotor.com/products/p ... df#page=19
rs fuji.png
rs fuji.png (15.84 KiB) Viewed 5407 times

Post Reply