Load with Stand while Power-off activated condition

Discuss Stepper motors, Drivers, Controllers, GUI's and related Accessories here.
Post Reply
Posts: 28
Joined: Tue Oct 02, 2018 9:45 pm
Location: New Jersey

Load with Stand while Power-off activated condition

Post by Mr.Thota » Wed Jul 24, 2019 1:19 am

Hi !!
Good Day !!

We are quite confusing to choose electromagnetic Brake Motor for one of our project application, requested to please clarify the following:

We have choosen combination of DSC Series, SCM425ECM-120 + DSCD25ECM + CC03SCM, wherein the static friction torque has been mentioend 100 mNm only, whether this is holding torque with gearhead combination ??

if not, please specify holding torque when power-off electromagnetic brake activated condition for SCM425ECM-120 + DSCD25ECM + CC03SCM.

Also requested to please specify the model: 5IK100VESMT2-150 to proceed further in this matter.

We required exact load capable to hold, while power-off activated condition for the above models.

Thanks and regards,

Posts: 69
Joined: Thu Jan 11, 2018 3:03 pm

Re: Load with Stand while Power-off activated condition

Post by om_tech_support_KR » Wed Jul 24, 2019 8:31 am

Hi Mr.Thota,

The static friction torque given would be of the motor only without the gearhead. To get the total static friction torque of a geared motor you would multiply that value by the gear ratio. This would be the case for both of those electromagnetic brake motors.

Post Reply