AZD KD MODBUS COMMUNICATION WITH QJ71C24N MITSUBISHI

Discuss Stepper motors, Drivers, Controllers, GUI's and related Accessories here.
Post Reply
Almighty
Posts: 7
Joined: Thu Jun 18, 2020 2:53 am

AZD KD MODBUS COMMUNICATION WITH QJ71C24N MITSUBISHI

Post by Almighty » Mon Oct 24, 2022 1:56 am

Dear sir.

Hello anyone
I have Stepper motor with contor AZD KD ORIENTAL.I Want to communication with QJ71C24N Mitsubishi modbus rtu 485 ,How to make program and Drive motor to multi position and speed and to get moving home position.
Please guide and show me How to Communicate it,
Thank you very much for your support.
Best Regards

om_tech_support_KR
Posts: 151
Joined: Thu Jan 11, 2018 3:03 pm

Re: AZD KD MODBUS COMMUNICATION WITH QJ71C24N MITSUBISHI

Post by om_tech_support_KR » Tue Oct 25, 2022 6:22 am

Hello,

Linked below is the function manual for the AZD-KD driver. The Modbus RS-485 section starts on page 263 and pages 290-295 have a positioning and Zhome operation example. The base address for the operation data numbers are on pages 385-390.

https://www.orientalmotor.com/products/ ... 262-9E.pdf

Almighty
Posts: 7
Joined: Thu Jun 18, 2020 2:53 am

Re: AZD KD MODBUS COMMUNICATION WITH QJ71C24N MITSUBISHI

Post by Almighty » Tue Oct 25, 2022 4:03 pm

Hello..
Thank you very much for your reply.
I will try it according to your instructions

Best Regards

Post Reply