US2 Series, Clarification

Post Reply
Mr.Thota
Posts: 50
Joined: Tue Oct 02, 2018 9:45 pm
Location: New Jersey

US2 Series, Clarification

Post by Mr.Thota » Mon Jul 19, 2021 5:32 am

Hi !!
Good Day !!
Hope you and your family are safe and doing good !!

We would like to operate US2 Series Speed Control System from an external relay limit switch function, so please let us now the wiring diagram for the same to proceed further in this matter.

Also, let us know how to set the parameters for the same.

Thanking you and BEst Regards,

Thota

om_tech_support_KR
Posts: 125
Joined: Thu Jan 11, 2018 3:03 pm

Re: US2 Series, Clarification

Post by om_tech_support_KR » Tue Jul 20, 2021 7:26 am

Hello,

Thank you and hope you are safe as well. For the wiring we have a diagram of this on page 12 of the manual that is linked below. To enable the inputs you will have to set the "External operation signal input" parameter to rE. The factory setting is oFF which only enables the front panel operation. This is referenced on page 15, 16 and 19.

https://www.orientalmotor.com/products/ ... 079-4E.pdf

Post Reply