SCX11 .NET

bartolini
Posts: 1
Joined: Sun Jul 14, 2013 1:52 am

SCX11 .NET

Postby bartolini » Sun Jul 14, 2013 2:05 am

I developed around 3 yeas ago one software in VB .NET for our machine.
I had two DGII series rotary tables with Advantech PCI-1243U for the contoller.

Now I'm developing a new similar machine but I have take two SCX11.
Are there .NET libraries that I can use into my VB .NET for the motor control?
Thanks a lot

User avatar
om_tech_support_JT
Posts: 1057
Joined: Fri Mar 12, 2010 2:59 pm
Location: Torrance, CA
Contact:

Re: SCX11 .NET

Postby om_tech_support_JT » Wed Jul 17, 2013 9:59 am

Sorry we don't provide a library like that. All we can offer is the SCX11 operating manual which can be searched and downloaded from our website. You'll have to do the conversion to VB yourself. I have provided the link for the manual below:

http://www.orientalmotor.com/products/p ... 60080E.pdf

If you prefer, we also offer a Modbus RTU compatible version of the DG II series rotary tables if you're interested.

Here's the DG II series brochure that contains information on both the pulse input type and the built-in controller type that can accept Modbus RTU control via RS-485:

http://www.orientalmotor.com/products/p ... Series.pdf


Return to “Stepping Motors & Controls”

Who is online

Users browsing this forum: No registered users and 2 guests