AR series : query alarm code (modbus)

EvanBae
Posts: 1
Joined: Tue Jul 24, 2018 9:39 pm

AR series : query alarm code (modbus)

Postby EvanBae » Tue Jul 24, 2018 10:15 pm

I doing update modbus(C++) driver for receive alarm and warning code from motor.
I try to query alarm code using "0080h" register address but motor response "0000"
But motor response no alarm.
Below query message format is not correct?

Ex)
10:15:57.083 [Send] 0203007f0001b5e1 -> Send : Query Motor Status
10:15:57.107 [Recv] 02030240810de4 -> Response : Alarm Status

10:15:57.107 [Send] 02030080000185d1 -> Send : Query Alarm Code
10:15:57.131 [Recv] 0203020000fc44 -> Response : No Alarm Code

om_tech_support_AC
Posts: 37
Joined: Tue Jan 03, 2017 2:53 pm

Re: AR series : query alarm code (modbus)

Postby om_tech_support_AC » Wed Jul 25, 2018 6:44 am

Hi EvanBae,

For the present alarm the upper value will always be 0000 because all the alarms codes can fit in the lower registry. Therefore try reading the lower present alarm register 0081h.


Return to “Stepping Motors & Controls”

Who is online

Users browsing this forum: No registered users and 3 guests