Search found 54 matches

by Mr.Thota
Tue Sep 21, 2021 6:49 am
Forum: Speed Control Systems
Topic: BLE Series, 13 Blinking Alarm Clarification
Replies: 3
Views: 2352

Re: BLE Series, 13 Blinking Alarm Clarification

Thankyou verymuch for your support & quick answer. :) :)
by Mr.Thota
Tue Sep 21, 2021 6:19 am
Forum: Speed Control Systems
Topic: BLE Series, 13 Blinking Alarm Clarification
Replies: 3
Views: 2352

Re: BLE Series, 13 Blinking Alarm Clarification

Hi !!
If possible, could you provide us speed reply ??
by Mr.Thota
Tue Sep 21, 2021 1:51 am
Forum: Speed Control Systems
Topic: BLE Series, 13 Blinking Alarm Clarification
Replies: 3
Views: 2352

BLE Series, 13 Blinking Alarm Clarification

Hi !! Good Day !! Hope you & your family & colleagues are fine and doing good !! In one of our automation projects, we are using BLEM512M2-GFS+GFS5G200+BLED12CM-R BLE Series, Brushless Motor Systems, while taking trails we are getting 13 blinkings alarm, we have gone through the manual, but unfortun...
by Mr.Thota
Thu Aug 05, 2021 5:16 am
Forum: Stepping Motors & Controls
Topic: PKP Series, with Encoder
Replies: 4
Views: 2767

Re: PKP Series, with Encoder

Hi !! How are you & your family !! Thankyou for your reply !! Finally, we would like to use 3 meters cable for the encoder only. Regarding I/O and driver DC Input cables we are required to use up to 5 Mtrs, will it be recommendable to use up to 5 mtrs length ?? Also please send us a detailed wiring ...
by Mr.Thota
Tue Aug 03, 2021 5:39 am
Forum: Stepping Motors & Controls
Topic: PKP Series, with Encoder
Replies: 4
Views: 2767

Re: PKP Series, with Encoder

Hi !!
Awaiting your valued confirmation, the customer machine and control panel distance is around 7 meters, so we required 7 meters length of cables.

Please suggest proceeding further in this matter.
by Mr.Thota
Mon Aug 02, 2021 7:27 am
Forum: Stepping Motors & Controls
Topic: PKP Series, with Encoder
Replies: 4
Views: 2767

PKP Series, with Encoder

Hi !! one of our projects, we would like to consider the below models. PKP223D15A2-R2EL + CVD215B-K + CCM070V2AAF + CC030E1R Indeed, we are looking for an encoder cable up to 7 meters (total), so please let us know whether it would be possible to use a 7 Mtrs cable ?? Please advise, how to go ahead ??
by Mr.Thota
Mon Jul 19, 2021 5:32 am
Forum: Speed Control Systems
Topic: US2 Series, Clarification
Replies: 1
Views: 1789

US2 Series, Clarification

Hi !! Good Day !! Hope you and your family are safe and doing good !! We would like to operate US2 Series Speed Control System from an external relay limit switch function, so please let us now the wiring diagram for the same to proceed further in this matter. Also, let us know how to set the parame...
by Mr.Thota
Wed Jun 02, 2021 4:53 am
Forum: Speed Control Systems
Topic: BMU Series, Clarifications
Replies: 17
Views: 14195

Re: BMU Series, Clarifications

Hi !!
Thankyou so much for your kind support !!
by Mr.Thota
Mon May 31, 2021 10:06 pm
Forum: Speed Control Systems
Topic: BMU Series, Clarifications
Replies: 17
Views: 14195

BLE2 Series, Clarifications

Hi !!
We eagerly awaiting your valued reply to enable us to proceed further in this matter.
Request you to please organize all the details immediately.
by Mr.Thota
Mon May 31, 2021 12:05 am
Forum: Speed Control Systems
Topic: BMU Series, Clarifications
Replies: 17
Views: 14195

BLE2 Series, Clarifications

Hi !! Thankyou for your support !! My application is only for single-direction horizontal only, Now it is very very urgently to be installed (without a regeneration resistor). Request you to please let us know, how to install my system without a regeneration resistor ?? Please explain along with the...
by Mr.Thota
Thu May 06, 2021 1:12 am
Forum: Speed Control Systems
Topic: BMU Series, Clarifications
Replies: 17
Views: 14195

BLE2 Series, Clarifications

Hi,
Good Day !!

Thankyou verymuch for your reply.
My application is only single direction horizontal only.
Request to please let us know, whether a regeneration resistor is to be required to connect ??
Please clarify the same.
by Mr.Thota
Thu May 06, 2021 12:23 am
Forum: Speed Control Systems
Topic: BMU Series, Clarifications
Replies: 17
Views: 14195

BLE2 Series, Clarifications

Thank you so much for your clarification !!
by Mr.Thota
Tue May 04, 2021 10:26 pm
Forum: Speed Control Systems
Topic: BMU Series, Clarifications
Replies: 17
Views: 14195

BLE2 Series, Clarifications

Hi,
Still, we eagerly awaiting for your clarification to proceed further in this matter.
by Mr.Thota
Tue May 04, 2021 5:14 am
Forum: Speed Control Systems
Topic: BMU Series, Clarifications
Replies: 17
Views: 14195

BLE2 Series, Clarifications

Hi !! Good Day !! sorry for the inconvenience caused to you, we have mentioned BMU Series in our previous mail, but the exact model is BLE2 Series only (BLM460SHPK-4H200S+BLE2D60-C+CC005HBLB). Kindly let me know the status of Error is AL51 only. Breaking resistor not considered in your quote too, if...
by Mr.Thota
Mon May 03, 2021 8:52 am
Forum: Speed Control Systems
Topic: BMU Series, Clarifications
Replies: 17
Views: 14195

Re: BMU Series, Clarifications

Request to please answer, as we are facing issues for the past few days.
Please understand and organize reply immediately.
by Mr.Thota
Mon May 03, 2021 2:06 am
Forum: Speed Control Systems
Topic: BMU Series, Clarifications
Replies: 17
Views: 14195

BMU Series, Clarification for Alarm error AL.51

Hi !!
Good Day !!

I hereby inform you that I am getting error AL51.
In My application, I use the motor in only one direction for start and stop only.
does resistor to be required for the same, please advise....
by Mr.Thota
Mon Mar 29, 2021 10:45 pm
Forum: Linear and Rotary Actuators and Controls
Topic: DRSM60-05A4AZMK, Compact Linear Actuator, Absolute Encoder
Replies: 1
Views: 3032

DRSM60-05A4AZMK, Compact Linear Actuator, Absolute Encoder

One of our customers is looking for DRSM60-05A4AZMK, 60 mm Compact Linear Actuator, Absolute Encoder for super finishing application. Indeed, we required a few clarifications for the following: Requirement: Application: Superfinishing operation of the gear shaft. Required stroke: 25 mm Environment: ...
by Mr.Thota
Wed Dec 16, 2020 3:59 pm
Forum: Speed Control Systems
Topic: BLH Series, Brushless DC Motors
Replies: 2
Views: 5824

Re: BLH Series, Brushless DC Motors

Hi, Good Day !! For one of our projects, we have Shortlisted Oriental Motor: BLHM015K-50 + Controller: BLH2D15-KD. Regarding our selected motor & controller model no., we have the following queries. 1. How to connect an external positional sensor (like proximity sensor) with this controller? 2. Cont...
by Mr.Thota
Mon Aug 10, 2020 9:34 am
Forum: Speed Control Systems
Topic: BLV 200 & 400 Watts for AGV Application
Replies: 4
Views: 6630

Re: BLV 200 & 400 Watts for AGV Application

Hi !!
Request to please reply, as we need your support immediately.
please do the needful..
by Mr.Thota
Mon Aug 10, 2020 6:58 am
Forum: Speed Control Systems
Topic: BLV 200 & 400 Watts for AGV Application
Replies: 4
Views: 6630

Re: BLV 200 & 400 Watts for AGV Application

Hi, Good Day !! Finally, we have installed the AGV System with BLV Series (BLV620K30S-2), we are using 04 motors for one AGV system. Also enclosed herewith the connection diagram and AGV diagram for your reference. Now, everything is working fine and operating. But, the 3rd rear of the wheel motor i...
by Mr.Thota
Wed Jul 08, 2020 5:08 am
Forum: Application Notes
Topic: Protection Options & Alarms Offered for Fan Products
Replies: 6
Views: 21759

Re: Protection Options & Alarms Offered for Fan Products

Hi !! Good Day !! We understand that there are two individual cables for alarm, that is black and orange, and in this Black is 0V and Orange is 24/30V right ?? It means we should provide external 0~30VDC sourcing power supply to black and orange right ?? For reading fan alarm signals to PLC, which w...
by Mr.Thota
Wed Jul 01, 2020 1:25 am
Forum: Application Notes
Topic: Protection Options & Alarms Offered for Fan Products
Replies: 6
Views: 21759

Re: Protection Options & Alarms Offered for Fan Products

Hi, Good Day !! Thank you for your reply. Does it mean we need to give the black wire to 0 and orange wire 24/30V DC ?? If it is like this, how could we get an output signal from the fan ?? what is voltage output (from a fan) shall we get it ??? because we required this output signal to our PLC ?? (...
by Mr.Thota
Sat Jun 27, 2020 4:49 am
Forum: Application Notes
Topic: Protection Options & Alarms Offered for Fan Products
Replies: 6
Views: 21759

Re: Protection Options & Alarms Offered for Fan Products

Hi !! Good Day !! We have gone through the above information, still, we have a bi confusion. How to give the connection for alarm for T-MRS18-TTM-G, please provide us wiring details. Also, will get it the 24 VDC from the fan when any abnormal condition ?? Please Clarify the 5v and 0v DC supply as pe...
by Mr.Thota
Thu May 28, 2020 10:55 pm
Forum: Stepper Motors and Controls
Topic: AR Series Stepper Motor Getting-7 time blinking alarm
Replies: 1
Views: 2858

AR Series Stepper Motor Getting-7 time blinking alarm

Hi team !! I hope you & your family are safe and doing good in this pandemic situation of Covid-19. After this 2-month shutdown, recently the m/c has started and its showing on Alarm coming -Motor fault... Activity done by the customer is, Battery voltage confirmed std : 2.4 v Actual :2.6 v (New Bat...
by Mr.Thota
Fri Mar 06, 2020 2:04 am
Forum: Stepper Motors and Controls
Topic: AZ stepper start command to motion delay
Replies: 3
Views: 6816

Re: AZ stepper start command to motion delay

Hi !!
Good Day !!

Look forward to receiving your valued reply.
even we have gone through alarm error codes in the manual, but unable to found the exact problem.
please look into this and do the favorable immediately.