Search found 47 matches

by Mr.Thota
Wed Jun 02, 2021 4:53 am
Forum: Speed Control Systems
Topic: BMU Series, Clarifications
Replies: 17
Views: 5898

Re: BMU Series, Clarifications

Hi !!
Thankyou so much for your kind support !!
by Mr.Thota
Mon May 31, 2021 10:06 pm
Forum: Speed Control Systems
Topic: BMU Series, Clarifications
Replies: 17
Views: 5898

BLE2 Series, Clarifications

Hi !!
We eagerly awaiting your valued reply to enable us to proceed further in this matter.
Request you to please organize all the details immediately.
by Mr.Thota
Mon May 31, 2021 12:05 am
Forum: Speed Control Systems
Topic: BMU Series, Clarifications
Replies: 17
Views: 5898

BLE2 Series, Clarifications

Hi !! Thankyou for your support !! My application is only for single-direction horizontal only, Now it is very very urgently to be installed (without a regeneration resistor). Request you to please let us know, how to install my system without a regeneration resistor ?? Please explain along with the...
by Mr.Thota
Thu May 06, 2021 1:12 am
Forum: Speed Control Systems
Topic: BMU Series, Clarifications
Replies: 17
Views: 5898

BLE2 Series, Clarifications

Hi,
Good Day !!

Thankyou verymuch for your reply.
My application is only single direction horizontal only.
Request to please let us know, whether a regeneration resistor is to be required to connect ??
Please clarify the same.
by Mr.Thota
Thu May 06, 2021 12:23 am
Forum: Speed Control Systems
Topic: BMU Series, Clarifications
Replies: 17
Views: 5898

BLE2 Series, Clarifications

Thank you so much for your clarification !!
by Mr.Thota
Tue May 04, 2021 10:26 pm
Forum: Speed Control Systems
Topic: BMU Series, Clarifications
Replies: 17
Views: 5898

BLE2 Series, Clarifications

Hi,
Still, we eagerly awaiting for your clarification to proceed further in this matter.
by Mr.Thota
Tue May 04, 2021 5:14 am
Forum: Speed Control Systems
Topic: BMU Series, Clarifications
Replies: 17
Views: 5898

BLE2 Series, Clarifications

Hi !! Good Day !! sorry for the inconvenience caused to you, we have mentioned BMU Series in our previous mail, but the exact model is BLE2 Series only (BLM460SHPK-4H200S+BLE2D60-C+CC005HBLB). Kindly let me know the status of Error is AL51 only. Breaking resistor not considered in your quote too, if...
by Mr.Thota
Mon May 03, 2021 8:52 am
Forum: Speed Control Systems
Topic: BMU Series, Clarifications
Replies: 17
Views: 5898

Re: BMU Series, Clarifications

Request to please answer, as we are facing issues for the past few days.
Please understand and organize reply immediately.
by Mr.Thota
Mon May 03, 2021 2:06 am
Forum: Speed Control Systems
Topic: BMU Series, Clarifications
Replies: 17
Views: 5898

BMU Series, Clarification for Alarm error AL.51

Hi !!
Good Day !!

I hereby inform you that I am getting error AL51.
In My application, I use the motor in only one direction for start and stop only.
does resistor to be required for the same, please advise....
by Mr.Thota
Mon Mar 29, 2021 10:45 pm
Forum: Linear and Rotary Actuators and Controls
Topic: DRSM60-05A4AZMK, Compact Linear Actuator, Absolute Encoder
Replies: 1
Views: 382

DRSM60-05A4AZMK, Compact Linear Actuator, Absolute Encoder

One of our customers is looking for DRSM60-05A4AZMK, 60 mm Compact Linear Actuator, Absolute Encoder for super finishing application. Indeed, we required a few clarifications for the following: Requirement: Application: Superfinishing operation of the gear shaft. Required stroke: 25 mm Environment: ...
by Mr.Thota
Wed Dec 16, 2020 3:59 pm
Forum: Speed Control Systems
Topic: BLH Series, Brushless DC Motors
Replies: 2
Views: 3658

Re: BLH Series, Brushless DC Motors

Hi, Good Day !! For one of our projects, we have Shortlisted Oriental Motor: BLHM015K-50 + Controller: BLH2D15-KD. Regarding our selected motor & controller model no., we have the following queries. 1. How to connect an external positional sensor (like proximity sensor) with this controller? 2. Cont...
by Mr.Thota
Mon Aug 10, 2020 9:34 am
Forum: Speed Control Systems
Topic: BLV 200 & 400 Watts for AGV Application
Replies: 4
Views: 3736

Re: BLV 200 & 400 Watts for AGV Application

Hi !!
Request to please reply, as we need your support immediately.
please do the needful..
by Mr.Thota
Mon Aug 10, 2020 6:58 am
Forum: Speed Control Systems
Topic: BLV 200 & 400 Watts for AGV Application
Replies: 4
Views: 3736

Re: BLV 200 & 400 Watts for AGV Application

Hi, Good Day !! Finally, we have installed the AGV System with BLV Series (BLV620K30S-2), we are using 04 motors for one AGV system. Also enclosed herewith the connection diagram and AGV diagram for your reference. Now, everything is working fine and operating. But, the 3rd rear of the wheel motor i...
by Mr.Thota
Wed Jul 08, 2020 5:08 am
Forum: Application Notes
Topic: Protection Options & Alarms Offered for Fan Products
Replies: 6
Views: 17089

Re: Protection Options & Alarms Offered for Fan Products

Hi !! Good Day !! We understand that there are two individual cables for alarm, that is black and orange, and in this Black is 0V and Orange is 24/30V right ?? It means we should provide external 0~30VDC sourcing power supply to black and orange right ?? For reading fan alarm signals to PLC, which w...
by Mr.Thota
Wed Jul 01, 2020 1:25 am
Forum: Application Notes
Topic: Protection Options & Alarms Offered for Fan Products
Replies: 6
Views: 17089

Re: Protection Options & Alarms Offered for Fan Products

Hi, Good Day !! Thank you for your reply. Does it mean we need to give the black wire to 0 and orange wire 24/30V DC ?? If it is like this, how could we get an output signal from the fan ?? what is voltage output (from a fan) shall we get it ??? because we required this output signal to our PLC ?? (...
by Mr.Thota
Sat Jun 27, 2020 4:49 am
Forum: Application Notes
Topic: Protection Options & Alarms Offered for Fan Products
Replies: 6
Views: 17089

Re: Protection Options & Alarms Offered for Fan Products

Hi !! Good Day !! We have gone through the above information, still, we have a bi confusion. How to give the connection for alarm for T-MRS18-TTM-G, please provide us wiring details. Also, will get it the 24 VDC from the fan when any abnormal condition ?? Please Clarify the 5v and 0v DC supply as pe...
by Mr.Thota
Thu May 28, 2020 10:55 pm
Forum: Stepper Motors and Controls
Topic: AR Series Stepper Motor Getting-7 time blinking alarm
Replies: 1
Views: 1151

AR Series Stepper Motor Getting-7 time blinking alarm

Hi team !! I hope you & your family are safe and doing good in this pandemic situation of Covid-19. After this 2-month shutdown, recently the m/c has started and its showing on Alarm coming -Motor fault... Activity done by the customer is, Battery voltage confirmed std : 2.4 v Actual :2.6 v (New Bat...
by Mr.Thota
Fri Mar 06, 2020 2:04 am
Forum: Stepper Motors and Controls
Topic: AZ stepper start command to motion delay
Replies: 3
Views: 4189

Re: AZ stepper start command to motion delay

Hi !!
Good Day !!

Look forward to receiving your valued reply.
even we have gone through alarm error codes in the manual, but unable to found the exact problem.
please look into this and do the favorable immediately.
by Mr.Thota
Thu Mar 05, 2020 4:27 am
Forum: Stepper Motors and Controls
Topic: AZ stepper start command to motion delay
Replies: 3
Views: 4189

AZ stepper 8 blinkings error

Hi, We have supplied the combination of AZM46AC-TS7.2+AZD-CD+CC025VZR, out of total 4 systems, in one system we are getting the following alarm and unable to resolve the same. No. of alarm blinking 8 times error is showing in HMI is " LOOP ROTATOR #3 DRIVER ERROR" after turn off & turn on the machin...
by Mr.Thota
Wed Jan 01, 2020 10:45 pm
Forum: Linear and Rotary Actuators and Controls
Topic: LBE Series, Linear Geared Motor with Control System
Replies: 5
Views: 4673

Re: LBE Series, Linear Geared Motor with Control System

Hi Team Members, All of you, Wish you a Happy New Year :) !! Concerning to your reply, thankyou verymuch. As we are very new for LBE series with BLE Series driver cobination, hence we required to clear all the quiries related to wiring and functions before going to finalazation. Hence, requested to ...
by Mr.Thota
Tue Dec 03, 2019 6:28 am
Forum: Linear and Rotary Actuators and Controls
Topic: LBE Series, Linear Geared Motor with Control System
Replies: 5
Views: 4673

Re: LBE Series, Linear Geared Motor with Control System

Hi !! Thankyou verymuch for your reply. Requested to please send us wiring details for this LBE Seris, since this is a new model combination it seems. Also please specify how to connect external sensors (PARP-MS) and input to controller and it's wiring details to proceed further. Please assist us wi...
by Mr.Thota
Thu Nov 28, 2019 6:56 am
Forum: Linear and Rotary Actuators and Controls
Topic: LBE Series, Linear Geared Motor with Control System
Replies: 5
Views: 4673

LBE Series, Linear Geared Motor with Control System

Hi !! We are planning to use Model: LBE2F90MC-8-1 LBE Series, Linear Geared Motor with Controller for vertical pushing & pulling application along with the following accessories. Please let us know your confirmation to proceed further in this matter. CC02BLEM Connection Cable with Electromagnetic Br...
by Mr.Thota
Mon Nov 04, 2019 6:11 am
Forum: Speed Control Systems
Topic: BHF Series Replacement
Replies: 1
Views: 3824

BHF Series Replacement

Hi!! One of our existing old projects we have used BHF Series, AC Speed Control System Model: BHF62CT-100 (Motor: BHM62T-G2 + Gearhead: BH6G2-100 + Control Circuit: FSP200-2), now we are looking for the same repeated requirement machine. so, we are looking for the similar replacement model for the a...
by Mr.Thota
Tue Oct 22, 2019 2:52 am
Forum: Speed Control Systems
Topic: BLH Series, Brushless DC Motors
Replies: 2
Views: 3658

BLH Series, Brushless DC Motors

Hi !! Good Day !! As we are planning to use direct BLH Series, Brushless Motor with Gearhead (without control circuit), please let us know your advice to proceed further in this matter. Also please let us know input power supply wire details to proceed further in this matter. thanking you and bEst r...
by Mr.Thota
Fri Oct 18, 2019 6:55 am
Forum: Stepper Motors and Controls
Topic: I/O cable for AR Series, AC Input type Stepper Motor
Replies: 1
Views: 2965

I/O cable for AR Series, AC Input type Stepper Motor

HI !!

We are planning to use AR Series Stepper Motor Combination: ARM98AC-PS36 + ARD-S +CC040VAF, we are quite confused about I/O cable, so please suggest us suitable I/O cable to proceed further in this matter.

thanking you and best regards.