Search found 30 matches

by Mr.Thota
Fri Mar 06, 2020 2:04 am
Forum: Stepper Motors and Controls
Topic: AZ stepper start command to motion delay
Replies: 3
Views: 1135

Re: AZ stepper start command to motion delay

Hi !!
Good Day !!

Look forward to receiving your valued reply.
even we have gone through alarm error codes in the manual, but unable to found the exact problem.
please look into this and do the favorable immediately.
by Mr.Thota
Thu Mar 05, 2020 4:27 am
Forum: Stepper Motors and Controls
Topic: AZ stepper start command to motion delay
Replies: 3
Views: 1135

AZ stepper 8 blinkings error

Hi, We have supplied the combination of AZM46AC-TS7.2+AZD-CD+CC025VZR, out of total 4 systems, in one system we are getting the following alarm and unable to resolve the same. No. of alarm blinking 8 times error is showing in HMI is " LOOP ROTATOR #3 DRIVER ERROR" after turn off & turn on the machin...
by Mr.Thota
Wed Jan 01, 2020 10:45 pm
Forum: Linear and Rotary Actuators and Controls
Topic: LBE Series, Linear Geared Motor with Control System
Replies: 5
Views: 1400

Re: LBE Series, Linear Geared Motor with Control System

Hi Team Members, All of you, Wish you a Happy New Year :) !! Concerning to your reply, thankyou verymuch. As we are very new for LBE series with BLE Series driver cobination, hence we required to clear all the quiries related to wiring and functions before going to finalazation. Hence, requested to ...
by Mr.Thota
Tue Dec 03, 2019 6:28 am
Forum: Linear and Rotary Actuators and Controls
Topic: LBE Series, Linear Geared Motor with Control System
Replies: 5
Views: 1400

Re: LBE Series, Linear Geared Motor with Control System

Hi !! Thankyou verymuch for your reply. Requested to please send us wiring details for this LBE Seris, since this is a new model combination it seems. Also please specify how to connect external sensors (PARP-MS) and input to controller and it's wiring details to proceed further. Please assist us wi...
by Mr.Thota
Thu Nov 28, 2019 6:56 am
Forum: Linear and Rotary Actuators and Controls
Topic: LBE Series, Linear Geared Motor with Control System
Replies: 5
Views: 1400

LBE Series, Linear Geared Motor with Control System

Hi !! We are planning to use Model: LBE2F90MC-8-1 LBE Series, Linear Geared Motor with Controller for vertical pushing & pulling application along with the following accessories. Please let us know your confirmation to proceed further in this matter. CC02BLEM Connection Cable with Electromagnetic Br...
by Mr.Thota
Mon Nov 04, 2019 6:11 am
Forum: Speed Control Systems
Topic: BHF Series Replacement
Replies: 1
Views: 1460

BHF Series Replacement

Hi!! One of our existing old projects we have used BHF Series, AC Speed Control System Model: BHF62CT-100 (Motor: BHM62T-G2 + Gearhead: BH6G2-100 + Control Circuit: FSP200-2), now we are looking for the same repeated requirement machine. so, we are looking for the similar replacement model for the a...
by Mr.Thota
Tue Oct 22, 2019 2:52 am
Forum: Speed Control Systems
Topic: BLH Series, Brushless DC Motors
Replies: 0
Views: 1340

BLH Series, Brushless DC Motors

Hi !! Good Day !! As we are planning to use direct BLH Series, Brushless Motor with Gearhead (without control circuit), please let us know your advice to proceed further in this matter. Also please let us know input power supply wire details to proceed further in this matter. thanking you and bEst r...
by Mr.Thota
Fri Oct 18, 2019 6:55 am
Forum: Stepper Motors and Controls
Topic: I/O cable for AR Series, AC Input type Stepper Motor
Replies: 1
Views: 1116

I/O cable for AR Series, AC Input type Stepper Motor

HI !!

We are planning to use AR Series Stepper Motor Combination: ARM98AC-PS36 + ARD-S +CC040VAF, we are quite confused about I/O cable, so please suggest us suitable I/O cable to proceed further in this matter.

thanking you and best regards.
by Mr.Thota
Thu Aug 22, 2019 6:51 am
Forum: Stepper Motors and Controls
Topic: CVK Series, Radiation Protection
Replies: 2
Views: 1423

Re: CVK Series, Radiation Protection

Hi !!
Awaiting for your valued reply for the above enquiry.
by Mr.Thota
Wed Aug 21, 2019 12:16 am
Forum: Stepper Motors and Controls
Topic: CVK Series, Radiation Protection
Replies: 2
Views: 1423

CVK Series, Radiation Protection

Hi !! Good Day !! As we are planning to use CVK Series, Stepper Motor with Controller Combination, (PKP246D23A2 + CVD223FBR-K + LC2B06E + LCS01CVK2) for one of our medical project, wherein X-Ray, UV & Infrared rays will be flawing on the motor & driver surface and it should not be harmful to our dri...
by Mr.Thota
Wed Aug 14, 2019 12:11 am
Forum: Stepper Motors and Controls
Topic: CVK Series TIM & Alarm Output
Replies: 4
Views: 1863

Re: CVK Series TIM & Alarm Output

Thankyou verymuch for your kind support..
by Mr.Thota
Sat Aug 10, 2019 5:05 am
Forum: Stepper Motors and Controls
Topic: CVK Series TIM & Alarm Output
Replies: 4
Views: 1863

Re: CVK Series TIM & Alarm Output

Hi !! Thankyou verymuch for your details, we are trying but unable to get TIM output 24V DC to read my PLC through this. A bit confusion about wiring, we need to be provide 24V DC to pin no. 11 & 12 (or) 9 & 10 ?? could you able to discribe the pin details exactly please !! please do the favourable....
by Mr.Thota
Sat Aug 03, 2019 4:41 am
Forum: Stepper Motors and Controls
Topic: CVK Series TIM & Alarm Output
Replies: 4
Views: 1863

CVK Series TIM & Alarm Output

Hi !! As we are working with PKP268D28B2 + CVD228BR-K + LC2B06E combination, wherein the TIM ouput which we are getting is voltage 0.2 ~ 0.5 V max. Which we would like to interface to our PLC for measuring values, but our PLC min reading voltage requirement is 20~24V DC. Hence requested to please le...
by Mr.Thota
Fri Aug 02, 2019 5:58 am
Forum: Linear and Rotary Actuators and Controls
Topic: DRL Series Motorised Actuator
Replies: 1
Views: 1566

DRL Series Motorised Actuator

Hi !!
We are planning to use DRL60G-05A4P-KB with cable: CC05PK5 + DRL28-06A1P-KB with cable: LC5N10A, hope these actuators are defined home position is sensor less right ??

Please let us know, if there is any other accessories is to be required ??

thanking you and regards,
by Mr.Thota
Wed Jul 24, 2019 1:19 am
Forum: Stepper Motors and Controls
Topic: Load with Stand while Power-off activated condition
Replies: 1
Views: 1244

Load with Stand while Power-off activated condition

Hi !! Good Day !! We are quite confusing to choose electromagnetic Brake Motor for one of our project application, requested to please clarify the following: We have choosen combination of DSC Series, SCM425ECM-120 + DSCD25ECM + CC03SCM, wherein the static friction torque has been mentioend 100 mNm ...
by Mr.Thota
Wed Jul 17, 2019 7:07 pm
Forum: Speed Control Systems
Topic: BMU Series, Clarifications
Replies: 4
Views: 2506

Re: BMU Series, Clarifications

Hi !!

We thankyou verymuch for your kind support :) :)
by Mr.Thota
Wed Jul 17, 2019 5:54 am
Forum: Speed Control Systems
Topic: BMU Series, Clarifications
Replies: 4
Views: 2506

Re: BMU Series, Clarifications

Hi !! Good Day !! Thankyou verymuch for your details, as you know, the recommended mcb is not clear view, NF30 Means that is one of the Series that is it. In that Manual ,they are give 10 Amps Circuit Breaker for 230 V Ac 1 Ph +N , 5 Amps Circuit Breaker for 230 V Ac 3Phase . Then shall use 2 P ,10 ...
by Mr.Thota
Mon Jul 15, 2019 7:04 pm
Forum: Speed Control Systems
Topic: BMU Series, Clarifications
Replies: 4
Views: 2506

BMU Series, Clarifications

Hi !! Good Day !! Requested to please ignore our previous post which is on 13th July, and requested to please consider below mail as on priority and orgnize the reply at the earliest. We are planning to use BMU Series for one of Conveyor Application, wherein we required to control Forward & Reverse ...
by Mr.Thota
Tue Jul 09, 2019 9:51 pm
Forum: Stepper Motors and Controls
Topic: Torque Setting & Limit Feedback
Replies: 5
Views: 2561

Re: Torque Setting & Limit Feedback

Hi,
Good Day !!
Thankyou verymuch for valued information provided by you.
Thankyou verymuch for your support !!
by Mr.Thota
Tue Jul 09, 2019 5:40 am
Forum: Stepper Motors and Controls
Topic: Torque Setting & Limit Feedback
Replies: 5
Views: 2561

Re: Torque Setting & Limit Feedback

Hi!! Good Day !! As we are going to finalize the models Motor: AZM98A0C + Built-In Controller: AZD-CD + Cable: CC030VZR for torque limiting application. Please advise whether we can get different torque values output (like 0.5 Nm, 1.0 Nm, 1.5 Nm and 2.0 Nm) when reaches setting torque right ?? Pleas...
by Mr.Thota
Mon Jun 24, 2019 12:24 am
Forum: Stepper Motors and Controls
Topic: CVK-SC Series Stepper Motor
Replies: 2
Views: 1689

Re: CVK-SC Series Stepper Motor

Thankyou somuch for your details !!
by Mr.Thota
Fri Jun 21, 2019 12:25 am
Forum: Stepper Motors and Controls
Topic: CVK-SC Series Stepper Motor
Replies: 2
Views: 1689

CVK-SC Series Stepper Motor

Hi !! As we would like to use this combination stepper motor unit ( Motor: PKP569FN24A2 + Contorl: CVD524B-KSC + Cable: LC2B06E + I/O Cable: LCS04SD5), which can be run by continuous duty cycle operation by giving ON/OFF switching input voltage (24VDC) ?? Hope this is not pulse input type right ?? a...
by Mr.Thota
Thu Jun 13, 2019 4:23 pm
Forum: Stepper Motors and Controls
Topic: Torque Setting & Limit Feedback
Replies: 5
Views: 2561

Re: Torque Setting & Limit Feedback

Thankyou somuch for your reply !! :
by Mr.Thota
Thu Jun 13, 2019 5:45 am
Forum: Stepper Motors and Controls
Topic: Torque Setting & Limit Feedback
Replies: 5
Views: 2561

Torque Setting & Limit Feedback

Hi !! As we are looking for 0 to 500 rpm minimum, Torque 2Nm and Torque feedback to be required. Ex: toruq should not be exceeding above 2 NM, when torque reaches 2 Nm and we require feedback signal from the motor. Pls consider motor should control through PLC output. Requested to please suggest us ...
by Mr.Thota
Mon Jun 10, 2019 3:37 am
Forum: Stepper Motors and Controls
Topic: Resurrecting the long forgoten.
Replies: 12
Views: 25021

Re: Resurrecting the long forgoten.

Hi !!

Good Day !!

Please let us know that, is there any replacment option for SG7100S ??
Kindly suggest us alternate one to proceed further.

Thanks and regards,